| Material description | General physical characteristics | |||
| The type of glue | Natural rubber | Adhesion to steel plates(stripping) GB/ t2792-2014 (20 minutes) | ≥3.5 N/25 mm | |
| Retentivity | ≥2hr | |||
| Substrate | Masking tape | Static shear force (hold) GB/T4851-2014 (24×24 mm) | ≥6% | |
| Thickness | Natural rubber | 0.06 mm (60μm) | ||
| Masking tape | 0.08 mm (80μm) | Initial adhesion (initial adhesion) (14# steel ball) | ≥80mm | |
| Amount to | 0.140mm (140μm) | |||
| Adhesion N/25mm | 8-11.8 | |||
| Color | Green | Temperature tolerance | 30-182℃ | |
| Expiration date | The original packaging, since the right to hold the delivery within 12months, in 21 ℃ (70 ℉), and 50% relative humidity environmentpreservation | |||
| Feature | Rubber masking tape, soft and fit, no residue after removal, high adhesion, tearable by hand, and writeable. | |||
| Application | Widely used in painting masking, paper fixing, artwork decoration, DIY project decoration and other fields. | |||
绿色画家胶带采用皱纹纸制成，一侧涂有橡胶粘合剂。它具有粘性强、不留残胶、用手撕下、可书写等特点。绿色油漆工胶带专门用于绘画、遮蔽或装饰胶带，每包 3 条，尺寸为 1 英寸 x 60 码。它可以保留长达 14 天，并且是可清洁去除的遮蔽胶带（0.75 英寸 19 毫米）。
color: green
Substrate: textured paper
Adhesive: pressure sensitive
Core material: paper tube
Weather resistance: -30°C~75°C
Type: single-sided tape
Uses: painting, spray masking
Tensile strength: >20N/cm
Feature
- Creates sharp, clean paint lines for more accessible, precise application to cars.
- The adhesive paper utilizes a weak backing that removes it from various surfaces without leaving a sticky residue or causing burrs.
- Imported high-density base paper, uniform thickness, good toughness, anti-penetration.
- The paper has sufficient toughness; it is not easy to break when pulled vertically, and it is more convenient to tear it horizontally.
- Good conformability, adheres to paper surface quickly and easily.
Product advantages:
All-Purpose Green Painters Tape is also ideal for high-performance painting for school art classes, DIY projects, crafts, and more. It’s easy to use because it’s easy to remove, strong, unbreakable, and easy to use. This tape conforms well and is easy to mask around angles, over contours, and irregular surfaces.
Painting use
Before you start painting, use green tape to cover the blank area, which can leave a clear and clean edge.
DIY project use
It can make the baby’s hand movements more fine. Fine finger movements stimulate the brain, making babies more active and intelligent.
Arts and crafts use
Design in a variety of ways, from geometric patterns to complex cartoon characters, adding unique decorations to your creations
When to Use Green Painters Tape?
In the painting process, painters often use green tape to protect or trim the edges of damaged areas. This practice ensures that any scratched coating remains unnoticeable along the edges. Additionally, if necessary, one can moderately expand the masking area. At this time, one can use green painter’s tape on the paper for extra protection. The specified location remains undamaged.
Note that the 2-inch painter’s masking tape is unsuitable for high-temperature environments. In high-temperature environments, problems such as softening and degradation are prone to occur, resulting in no longer having the original stickiness and producing odors and harmful substances.
Green painters tape FAQ
- What is green painters tape for?
When artists or students paint, they can use them for masking to protect the area from damage. - green painters tape sizes
Green painter’s tape is available in 0.75/1/2″ and 60/66 yards, and wide painter’s tape is strong enough to protect more expansive areas while painting. - Green painter tape vs. blue
Green painter’s tape and yellow painter’s tape are relatively common colors. Both tapes exhibit similar performance and can undergo customization for stronger stickiness. - Is painter tape safe to stay on a car’s paint for few days?
Under normal circumstances, the car’s green masking tape can stay for about 14 days and be removed cleanly without damaging the car paint. Avoid exposing it to the sun, but some inferior colloids contain ingredients that may harm car paint. It may damage painted surfaces.
The whole process of green painter’s tape processing and production has the following steps:
- Adding raw materials
First, import the raw materials needed for production, such as acrylic acid, into the emulsification tank for emulsification. - Reactor heating
Put the emulsified raw materials into the reactor to heat. - Production of glue
After completing the above steps, the adhesive products undergo manufacturing. - Coating machine gluing
Put the processed glue into the film for gluing. - Made into a semi-finished product
The masking tape production process results in a semi-finished product known as the primary roll of tape. - Tube Cutter Cutting
Use a tube cutter to cut the freshly processed primary roll of tape. - Slitting machine slitting
After cutting the primary roll of masking tape, one selects the slitting machine for the tape production process. - Packing box
After cutting and slitting the original roll of masking tape, it becomes the tape that everyone sees in the market. Packing boxes are now available. - Finished tape
After cutting the primary roll of masking tape, one selects the slitting machine for the tape production process.
Green painter’s tape not only has high practical value but also has good market demand. The use temperature is the average temperature. Storing it in a cool place is important as excessively high and low temperatures can affect its performance. The shelf life is about three months, and more than three months will involve the use effect.